SMA Sunny Boy 3000TL-21

Introduction

The Sunny Boy 3500TL-JP, 4500TL-JP and 5400TL-JP offer more communication options, are easier to use and more efficient than ever – setting new standards in inverter technology. A modern graphic display, indication of the daily values even after sunset, simplified installation concept, stand-alone function and wireless communication via Bluetooth: The new Sunny Boys fulfill every wish. The Sunny Boy 3500TL-JP, 4500TL-JP and 5400TL-JP have a peak efficiency of 96.7 percent with a wide input voltage range. They are multi string inverters providing an optimal yield, maximum flexibility for system design and an outstanding module compatibility – this makes them the first choice for nearly any PV system.

Features

Leading-edge Technology

  • Maximum efficiency of 96.7 % and wide input voltage range
  • ESS
  • Transformerless with H5 topology
  • OptiTrac MPP control
  • Multi-String

Easy Installation

  • Easily accessible connection compartment
  • Cabling without tools
  • Ergonomic design
  • For Global use
  • Comprehensive SMA warranty program
  • JET certification

Communicative

  • Bluetooth® Technology
  • Graphic display

Zeverlution 5000S

Input (DC)

Maximum PV array power (STC) 6500 Wp
Maximum DC power at cosφ=1 5300W
Max. input voltage 600V
MPP voltage range / rated input voltage 100-520V / 360V
Min. start voltage 80V
Min. feed-in power 20W
Max. input current per MPPT 11A / 11A
Number of MPPTs 2
Number of independent MPP inputs 1/1

Output (AC)

Rated active power 5000W1
Max. apparent AC power 5000VA1
Nominal AC voltage / range 220V, 230V, 240V / 180-280V
AC power frequency / range 50, 60 / +-5Hz
Rated power frequency / rated grid voltage 50Hz / 230V
Max. output current 23A2
Power factor (@rated power) 1
Adjustable displacement power factor 0.8 inductive … 0.8 capacitive
Feed-in phases / connection phases 1 / 1
Harmonic distortion (THD) at rated output < 3%

Efficiency

Max. efficiency / European weighted efficiency 97.2% / 96.5%
MPPT efficiency 99.5%

Protective devices

DC isolator
PV iso / Grid monitoring ● / ●
DC reverse polarity protection / AC short-circuit current capability ● / ●
GFCI function
Protection class (according to IEC 62103) / Overvoltage category (according to IEC 60664-1) I / II(DC), III(AC)

General data

Interfaces: RS485 / RS4853 & Ethernet & WIFI & a.RJ454(DRED) ● / ○
Earth Fault Alarm5 cloud based, audible and visible
Display 16 x 2 characters
Dimensions (W x H x D) 341 x 395 x 172mm
Weight 11kg
Cooling concept convection
Noise emission (typical) < 25 dB(A)@1m
Installation indoor & outdoor
Mounting information wall mounting bracket
DC connection technology SUNCLIX
AC connection technology screw clamp terminal
Operating temperature range -25℃ … +60℃ / -13℉ … +140℉
Relative humidity (non-condensing) 0% … 100%
Max. operating altitude 4000m (> 3000m derating)
Degree of protection (according to IEC 60529) IP65
Climatic category (according to IEC 60721-3-4) 4K4H
Topology transformerless
Self-consumption (night) <1W
Standby power 8.5W

 

1Based on the VDE 4105 requirements active power and apparent power will be limited to 4600W and 4600VA
221.7A according to AS/NZS4777.2:2015
32-pin RS485 for connection to approved smart meters in zero export installations (replacing standard RS485 on RJ 45 connector)
4 Analog RJ45 interface to DRED in Australia & New Zealand
5 Selectable in ZeverCloud; audible alarm will only be activated in AS4777 setting

● standard
○ optional
– not available

 

As of October, 2017 / Technical data is subject to revisions.

If you find a high quality constructor for your project?